|
TNR32-12V
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
 TNR32_12V_508fb321c1caf.gif
Description
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
| Type: |
Special purpose housings |
| Efficient useful volume, mm: |
260x73x66 |
| Series: |
TRAFFIC |
| Operational temperature, degrees Centigrade: |
–65..+40 |
| Input voltage to the Housing, V: |
9 DC..18 DC |
| Voltage to be supplied to the TV camera, V: |
9 DC, 12 DC |
Function
Features
Environmental parameters
Geometrical parameters
Constructive parameters
Electrical parameters
Additional information
{reg} {reg}Similar models
Function
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
Features
- Housing window is a light filter with spectral absorption range 0,7 - 1,2mkm
- Reliable and timely switching on and switching off of heater equipped with optic switch and temperature detector
- Galvanic transformer power supply decoupling
- All fastening parts are made of stainless steel
- Input voltage: 9..12 DC
- Sealing gaskets are made of Armlen
- Direct heating of glass over perimeter
- Direct monitoring and maintenance of TV-camera temperature
- Accident-free mode of TV-camera switching on at frost (power will be supplied to TV-camera only after preliminary heating)
- Unique low power consumption
- Painting any colour of the RAL scale is possible
Environmental parameters
| Tested operating range of ambient temperature |
–65°С..+40°С |
| Class of protection against environmental impacts |
IP66 (complete dust protection; protection against water jets from any direction) |
Geometrical parameters
Overall dimensions and usable volume:
Constructive parameters
| Diameter of cables for connection of housing |
4-8 mm |
| Weight of assembled housing |
3,8 kg |
| Maximum load at bracket |
50 kg with safety factor 2,6 |
| Coating |
powder polyester paint, color: light-gray (RAL7035) |
| Material |
extruded aluminum; die-cast aluminum |
| Glass |
light filter with spectral absorption range (0,7 - 1,2 mkm) |
| Fastening parts |
stainless steel |
| Material of sealing gaskets |
Armlen |
| Material of cable glands |
brass |
Electrical parameters
| Maximum power, consumed by housing (including TV-camera) |
17,5W |
| Maximum current, consumed by housing (including TV-camera) |
1,45A (12 DC) |
| TV-camera heater |
power supply |
24V DC |
| power |
6W |
| switching on/off temperature |
+4°С/+6°С |
| Glass heater |
power supply |
24V DC |
| power |
2W |
| switching on/off temperature |
switch on - continuously |
| TV-camera power supply |
input voltage (one of specified voltages shall be selected by user) |
9 DC..18 DC |
| output voltage (one of specified voltages shall be selected by user) |
12V DC±10% (400 mA max)
9V DC±10% (400 mA max) |
| Galvanic power supply decoupling |
transformer |
Additional information
Supply set:
| Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply |
1 |
| Sun shield |
1 |
| Cable glands for connection of power supply and video signal outlet |
2 |
| Isolation bush |
1 |
| Isolation gasket |
1 |
| Adjusting gaskets |
4 |
| Screws of different length for fastening of TV-camera |
3 |
| Screw for fixing of heaters block with temperature detector |
1 |
| Bracket with screws for fastening of case |
1 |
| Assembly key |
1 |
| Silica gel |
2 |
| Operating and assembling manual – Housing with TV-camera |
1 |
| Warranty coupon |
1 |
| Certificate |
1 |
| All used engineering solutions are patented |
№ 13437, № 20599 |
{reg} {reg}Similar models
TNR32
|
|
TNR32_12V_508fb321c1caf.gif
