|
THM40HF-220V
Protection of TV-camera with fixed or vario lens or zoom lens against unfavorable effects of environment: marine climate, chemical production and other aggressive environments.
 THM40HF_220V_50910fc763b15.gif
Description
Protection of TV-camera with fixed or vario lens or zoom lens against unfavorable effects of environment: marine climate, chemical production and other aggressive environments.
| Type: |
Special purpose housings |
| Efficient useful volume, mm: |
Ø105Х270 |
| Series: |
MARINE |
| Operational temperature, degrees Centigrade: |
–60..+40 |
| Input voltage to the Housing, V: |
220 AC |
| Voltage to be supplied to the TV camera, V: |
9 DC, 12 DC, 24 AC |
Function
Features
Environmental parameters
Geometrical parameters
Constructive parameters
Electrical parameters
Additional information
{reg} {reg}Similar models
Function
Protection of TV-camera with fixed or vario lens or zoom lens against unfavorable effects of environment: marine climate, chemical production and other aggressive environments.
Features
- All parts are made of stainless material with increased corrosion resistance
- Input voltage: 220V AC
- Galvanic transformer power supply decoupling, in-built TV-camera power supply
- Reliable and timely switching on and switching off of heater equipped with optic switch and temperature detectors
- Mounting plate heater 20W
- Additional glass heater
- Anti-fog fan
- Sealing gaskets are made of warm-, cold-, acid-, caustic-resistant rubber
- Direct monitoring and maintenance of TV-camera temperature
- Accident-free mode of TV-camera switching on at frost (power will be supplied to TV-camera only after preliminary heating)
- Class of protection against environmental impacts - IP66 (complete dust protection; protection against water jets from any direction)
Environmental parameters
| Tested operating range of ambient temperature |
–60°С..+40°С |
| Class of protection against environmental impacts |
IP66 (complete dust protection; protection against water jets from any direction) |
Geometrical parameters
Overall dimensions and usable volume:
Constructive parameters
| Diameter of cables for connection of housing |
6-10 mm |
| Weight of assembled housing |
12,8 kg |
| Maximum load at bracket |
60 kg with safety factor 2,6 |
| Material |
stainless steel |
| Glass |
special polishing, without optic distortion |
| Fastening parts |
stainless steel |
| Material of sealing gaskets |
warm-, cold-, acid-, caustic-resistant rubber |
| Material of cable glands |
brass |
Electrical parameters
| Maximum power, consumed by housing (including TV-camera) |
66W |
| Maximum current, consumed by housing (including TV-camera) |
0,30A (220V AC) |
| TV-camera heater |
power supply |
24V AC |
| power |
6W |
| switching on/off temperature |
+4°С/+6°С |
| Mounting plate heater |
power supply |
220V AC |
| power |
20W |
| switching on/off temperature |
+10°С/+20°С |
| 2 steps glass heater |
power supply |
220V AC |
| power |
4,5W/13,5W |
| switching on/off temperature |
+10°С/+20°С |
| TV-camera power supply |
input voltage |
220V AC±10% |
| output voltage (one of specified voltages shall be selected by user) |
24V AC±10% (400 mA max);
12V DC±10% (500 mA max);
9V DC±10% (500 mA max); |
| Galvanic power supply decoupling |
transformer |
Additional information
Supply set:
| Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply |
1 |
| Sun shield |
1 |
| Cable glands for connection of power supply and video signal outlet |
2 |
| Isolation bush |
1 |
| Isolation gasket |
1 |
| Adjusting gaskets |
4 |
| Screws of different length for fastening of TV-camera |
3 |
| Screw for fixing of heaters block with temperature detector |
1 |
| Wall bracket |
1 |
| Assembly key |
1 |
| Silica gel |
2 |
| Warranty coupon |
1 |
| Operating and assembling manual – Housing with TV-camera |
1 |
| Certificate |
1 |
| All used engineering solutions are patented |
№ 13437, № 20599 |
{reg} {reg}Similar models
THM40
THM40H-220V
THM40H-24V
THM40HF-24V
|
|
THM40HF_220V_50910fc763b15.gif
