WEX40-24V-08

Housing WEX40-24V-08 is designed to protect CCTV cameras with fixed or vario lens or zoom lens against adverse environmental effects in highly explosive and fire hazardous areas both inside and outside the premises. Type of explosion protection – explosion-proof casing.
Explosion protection certification: 1ExdIICT6X.

Function
Features
Environmental parameters
Geometrical parameters
Constructive parameters
Electrical parameters
Additional information
{reg} {reg}Similar models

Function

Housing WEX40-24V-08 is designed to protect CCTV cameras with fixed or vario lens or zoom lens against adverse environmental effects in highly explosive and fire hazardous areas both inside and outside the premises.
Type of explosion protection – explosion-proof casing.
Explosion protection certification: 1ExdIICT6X

Conditions of Use
The housing is designed for use in explosive areas both inside and outside premises in which flammable dust, fume and gas mixtures which come under spontaneous ignition temperature group T6 (GOST R 51330.0-99) are (may be) present.
The climate factor standard for use in working conditions according to GOST 15150-69 is for climate version Moderate Cold 1.5, but it is also of the standard for being kept in a corrosive atmosphere, and for marine (III) and coastal industrial (IV) atmospheres.
For use in non-working conditions (transport, storage, to be turned on after a period of disuse) the lowest temperature standard should not be lower than minus 30ºС. According to operational temperature of the environment the housing comes under special electrical apparatus category (GOST R 51330.0-99).

Features

1. The type of explosion protection used is an explosion-proof casing (“d” GOST R 51330.1-99). Explosion protection is achieved through enclosure of the camera and all the electronic parts within the explosion-proof casing, which contains the pressure of an internal explosion and prevents the explosion from passing on to the surrounding environment.
2. The built-in power supply produces a universal voltage range for cameras and provides galvanic power supply decoupling.
3. For the purpose of creating the favorable temperature conditions for the camera to function, the housing is equipped with a triple heating system. The heating system includes a unit of heaters which directly maintain the temperature of the camera body, a dual-mode screen heater and a high-powered mounting plate heater.
4. The housing control unit carries out the trouble-free procedure of switching on the camera (the power supply is fed to the camera only after preliminary warming-up).
5. The camera body heater (6 W) is controlled by an electronic sensor.
6. The mounting plate heater (20 W) and the dual-mode screen heater (4.5/13.5 W) are controlled by a bimetal thermorelay.
7. A wall bracket with two degrees of freedom ensures the vertical mounting of the housing and the choice of scan direction of the camera (search for objects) to a wide range of angles.
8. Input voltage: 220V AC.
9. The exterior elements of the housing construction are made out of corrosion-resistant materials.
10. The built-in lightning-arrester and protection against high-voltage impulse interferences.

Environmental parameters

Geometrical parameters

Overall dimensions and usable volume:

Constructive parameters

Electrical parameters

Lightning-arrester specifications:

Ранее используемые типы кабеля :

Также Вы можете заказать свой тип кабеля

Additional information

Supply set:

{reg} {reg}

---

Similar models

WEX40-220V-03
WEX40-24V-03
WEX40-220V-08
WEX40-220V-03 (with blend)
WEX40-24V-03 (with blend)
WEX40-220V-08 (with blend)
WEX40-24V-08 (with blend)