|
SVS26P-42V
Protection of TV-camera with fixed or vario lens against unfavorable impact of extreme cold climatic conditions.
Special_SVS26P_4_5077fdcdcdcf6.gif
Description
Protection of TV-camera with fixed or vario lens against unfavorable impact of extreme cold climatic conditions.
Type: |
SPECIAL |
Efficient useful volume, mm: |
190x73x66 |
Series: |
260 |
Operational temperature, degrees Centigrade: |
–65..+40 |
Input voltage to the Housing, V: |
42 AC |
Voltage to be supplied to the TV camera, V: |
9 DC, 12 DC, 24 AC |
Function Features Environmental parameters Geometrical parameters Constructive parameters Electrical parameters Additional information {reg} {reg}Similar models
Function
Protection of TV-camera with fixed or vario lens against unfavorable impact of extreme cold climatic conditions.
Features
- Reliable and timely switching on and switching off of heater equipped with optic switch and temperature detector
- Galvanic transformer power supply decoupling, in-built TV-camera power supply
- All fastening parts are made of stainless steel
- Input voltage: 42V AC
- Sealing gaskets are made of Armlen
- Direct heating of glass over perimeter
- Direct monitoring and maintenance of TV-camera temperature
- Accident-free mode of TV-camera switching on at frost (power will be supplied to TV-camera only after preliminary heating)
- Unique low power consumption
- Painting any colour of the RAL scale is possible
Environmental parameters
Tested operating range of ambient temperature |
–65°С..+40°С |
Class of protection against environmental impacts |
IP66 (complete dust protection; protection against water jets from any direction) |
Geometrical parameters
Overall dimensions and usable volume:
Constructive parameters
Diameter of cables for connection of housing |
4-8 mm |
Weight of assembled housing |
3,5 kg |
Maximum load at bracket |
50 kg with safety factor 2,6 |
Coating |
powder polyester paint, color: light-gray (RAL7035) |
Material |
extruded aluminum; die-cast aluminum |
Glass |
special polishing, without optic distortion |
Fastening parts |
stainless steel |
Material of sealing gaskets |
Armlen |
Material of cable glands |
brass |
Electrical parameters
Maximum power, consumed by housing (including TV-camera) |
22W |
Maximum current, consumed by housing (including TV-camera) |
0,6A (42V AC)
|
TV-camera heater |
power supply |
24V AC |
power |
6W |
switching on/off temperature |
+4°С/+6°С |
Glass heater |
power supply |
24V AC |
power |
2W |
switching on/off temperature |
switch on - continuously |
TV-camera power supply |
input voltage |
42V AC±10% |
output voltage (one of specified voltages shall be selected by user) |
24V AC±10% (400 mA max); 12V DC±10% (400 mA max); 9V DC±10% (400 mA max) |
Galvanic power supply decoupling |
transformer |
Additional information
Supply set:
Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply |
1 |
Sun shield |
1 |
Cable glands for connection of power supply and video signal outlet |
2 |
Isolation bush |
1 |
Isolation gasket |
1 |
Adjusting gaskets |
4 |
Screws of different length for fastening of TV-camera |
3 |
Screw for fixing of heaters block with temperature detector |
1 |
Bracket with screws for fastening of case |
1 |
Assembly key |
1 |
Silica gel |
2 |
Operating and assembling manual – Housing with TV-camera |
1 |
Warranty coupon |
1 |
Certificate |
1 |
All used engineering solutions are patented |
№ 13437, № 20599 |
{reg} {reg}Similar models
SVS26P SVS26P-12V SVS32P SVS32P-12V SVS32P-42V
|
|