The WIZEBOX WIR26P-12V housing provides protection of compact thermal imaging camera with fixed lens against unfavorable impact in extreme cold climate.
Type: | Special purpose housings |
Efficient useful volume, mm: | 200x73x66 |
Series: | INFRARED |
Operational temperature, degrees Centigrade: | –65..+55 |
Input voltage to the Housing, V: | 9 DC..18 DC |
Voltage to be supplied to the TV camera, V: | 9 DC, 12 DC |
Function
Features
Environmental parameters
Geometrical parameters
Constructive parameters
Electrical parameters
Additional information
{reg} {reg}Similar models
The WIZEBOX WIR26P-12V housing provides protection of compact thermal imaging camera with fixed lens against unfavorable impact in extreme cold climate.
Tested operating range of ambient temperature | –65°С..+55°С |
Class of protection against environmental impacts | IP66 (complete dust protection; protection against water jets from any direction) |
Overall dimensions and usable volume:
Diameter of cables for connection of housing | 4-8 mm |
Weight of assembled housing | 3,2 kg |
Maximum load at bracket | 50 kg with safety factor 2,6 |
Coating | powder polyester paint, color: light-gray (RAL7035) |
Material | extruded aluminum; die-cast aluminum |
Glass | special polishing, without optic distortion |
Fastening parts | stainless steel |
Material of sealing gaskets | Armlen |
Material of cable glands | brass |
Maximum power, consumed by housing (including thermal imaging camera) | 17,5W | |
Maximum current, consumed by housing (including thermal imaging camera) | 1,45A (12 DC) | |
TV-camera heater | power supply | 24V DC |
power | 6W | |
switching on/off temperature | +4°С/+6°С | |
Glass heater | power supply | 24V DC |
power | 2W | |
switching on/off temperature | switch on - continuously | |
Thermal imaging camera power supply | input voltage | 9 DC..18 DC |
output voltage (one of specified voltages shall be selected by user) | 12V DC±10% (400 mA max); 9V DC±10% (400 mA max) |
|
Galvanic power supply decoupling | transformer |
Supply set:
Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply | 1 |
Sun shield | 1 |
Cable glands for connection of power supply and video signal outlet | 2 |
Mount set for installation thermal imaging camera and heater | 1 |
Cross-card for connection thermal imaging camera to power supply and video signal line | 1 |
Bracket with screws for fastening of case | 1 |
Assembly key | 1 |
Silica gel | 2 |
Operating and assembling manual – Housing with TV-camera | 1 |
Warranty coupon | 1 |
Certificate | 1 |
All used engineering solutions are patented | № 13437, № 20599 |