|
WIR26P-12V
The WIZEBOX WIR26P-12V housing provides protection of compact thermal imaging camera with fixed lens against unfavorable impact in extreme cold climate.
WIR26P_12V_508faea2e3251.gif
Description
The WIZEBOX WIR26P-12V housing provides protection of compact thermal imaging camera with fixed lens against unfavorable impact in extreme cold climate.
Type: |
Special purpose housings |
Efficient useful volume, mm: |
200x73x66 |
Series: |
INFRARED |
Operational temperature, degrees Centigrade: |
–65..+55 |
Input voltage to the Housing, V: |
9 DC..18 DC |
Voltage to be supplied to the TV camera, V: |
9 DC, 12 DC |
Function Features Environmental parameters Geometrical parameters Constructive parameters Electrical parameters Additional information {reg} {reg}Similar models
Function

The WIZEBOX WIR26P-12V housing provides protection of compact thermal imaging camera with fixed lens against unfavorable impact in extreme cold climate.
Features
- IR optics window (screen), made from material with transmission range 7-14mkm
- Double sided antireflection coating provides transmittion coefficient about 94%
- Reliable and timely switching on and switching off of heater equipped with optic switch and temperature detector
- Galvanic transformer power supply decoupling
- All fastening parts are made of stainless steel
- Input voltage: 9 DC..18 DC
- Sealing gaskets are made of Armlen
- Direct heating of glass over perimeter
- Direct monitoring and maintenance of compact thermal imaging camera temperature
- Accident-free mode of TV-camera switching on at frost (power will be supplied to TV-camera only after preliminary heating)
- Unique low power consumption
- Painting any colour of the RAL scale is possible
Environmental parameters
Tested operating range of ambient temperature |
–65°С..+55°С |
Class of protection against environmental impacts |
IP66 (complete dust protection; protection against water jets from any direction) |
Geometrical parameters
Overall dimensions and usable volume:

Constructive parameters
Diameter of cables for connection of housing |
4-8 mm |
Weight of assembled housing |
3,2 kg |
Maximum load at bracket |
50 kg with safety factor 2,6 |
Coating |
powder polyester paint, color: light-gray (RAL7035) |
Material |
extruded aluminum; die-cast aluminum |
Glass |
special polishing, without optic distortion |
Fastening parts |
stainless steel |
Material of sealing gaskets |
Armlen |
Material of cable glands |
brass |
Electrical parameters
Maximum power, consumed by housing (including thermal imaging camera) |
17,5W |
Maximum current, consumed by housing (including thermal imaging camera) |
1,45A (12 DC) |
TV-camera heater |
power supply |
24V DC |
power |
6W |
switching on/off temperature |
+4°С/+6°С |
Glass heater |
power supply |
24V DC |
power |
2W |
switching on/off temperature |
switch on - continuously |
Thermal imaging camera power supply |
input voltage |
9 DC..18 DC |
output voltage (one of specified voltages shall be selected by user) |
12V DC±10% (400 mA max); 9V DC±10% (400 mA max) |
Galvanic power supply decoupling |
transformer |
Additional information
Supply set:
Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply |
1 |
Sun shield |
1 |
Cable glands for connection of power supply and video signal outlet |
2 |
Mount set for installation thermal imaging camera and heater |
1 |
Cross-card for connection thermal imaging camera to power supply and video signal line |
1 |
Bracket with screws for fastening of case |
1 |
Assembly key |
1 |
Silica gel |
2 |
Operating and assembling manual – Housing with TV-camera |
1 |
Warranty coupon |
1 |
Certificate |
1 |
All used engineering solutions are patented |
№ 13437, № 20599 |
{reg} {reg}Similar models
THM32-IR THM32H-220V-IR THM32H-24V-IR WIR26P
|
|