TNR32_12V_508fb321c1caf.gif
TNR32-12V
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
TNR32_12V_508fb321c1caf.gif
Description
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
| Type: | Special purpose housings |
| Efficient useful volume, mm: | 260x73x66 |
| Series: | TRAFFIC |
| Operational temperature, degrees Centigrade: | –65..+40 |
| Input voltage to the Housing, V: | 9 DC..18 DC |
| Voltage to be supplied to the TV camera, V: | 9 DC, 12 DC |
Function
Features
Environmental parameters
Geometrical parameters
Constructive parameters
Electrical parameters
Additional information
{reg} {reg}Similar models
Function
Housing WIZEBOX TNR32-12V is intended for video systems with automatic identification of auto licence plates and provides protection of TV-camera with fixed or variable lens against adverse environmental effects in cold climate.
Features
- Housing window is a light filter with spectral absorption range 0,7 - 1,2mkm
- Reliable and timely switching on and switching off of heater equipped with optic switch and temperature detector
- Galvanic transformer power supply decoupling
- All fastening parts are made of stainless steel
- Input voltage: 9..12 DC
- Sealing gaskets are made of Armlen
- Direct heating of glass over perimeter
- Direct monitoring and maintenance of TV-camera temperature
- Accident-free mode of TV-camera switching on at frost (power will be supplied to TV-camera only after preliminary heating)
- Unique low power consumption
- Painting any colour of the RAL scale is possible
Environmental parameters
| Tested operating range of ambient temperature | –65°С..+40°С |
| Class of protection against environmental impacts | IP66 (complete dust protection; protection against water jets from any direction) |
Geometrical parameters
Overall dimensions and usable volume:
Constructive parameters
| Diameter of cables for connection of housing | 4-8 mm |
| Weight of assembled housing | 3,8 kg |
| Maximum load at bracket | 50 kg with safety factor 2,6 |
| Coating | powder polyester paint, color: light-gray (RAL7035) |
| Material | extruded aluminum; die-cast aluminum |
| Glass | light filter with spectral absorption range (0,7 - 1,2 mkm) |
| Fastening parts | stainless steel |
| Material of sealing gaskets | Armlen |
| Material of cable glands | brass |
Electrical parameters
| Maximum power, consumed by housing (including TV-camera) | 17,5W | |
| Maximum current, consumed by housing (including TV-camera) | 1,45A (12 DC) | |
| TV-camera heater | power supply | 24V DC |
| power | 6W | |
| switching on/off temperature | +4°С/+6°С | |
| Glass heater | power supply | 24V DC |
| power | 2W | |
| switching on/off temperature | switch on - continuously | |
| TV-camera power supply | input voltage (one of specified voltages shall be selected by user) | 9 DC..18 DC |
| output voltage (one of specified voltages shall be selected by user) | 12V DC±10% (400 mA max) 9V DC±10% (400 mA max) |
|
| Galvanic power supply decoupling | transformer | |
Additional information
Supply set:
| Housing with connected heaters/ temperature detectors, installed control block and TV- camera power supply | 1 |
| Sun shield | 1 |
| Cable glands for connection of power supply and video signal outlet | 2 |
| Isolation bush | 1 |
| Isolation gasket | 1 |
| Adjusting gaskets | 4 |
| Screws of different length for fastening of TV-camera | 3 |
| Screw for fixing of heaters block with temperature detector | 1 |
| Bracket with screws for fastening of case | 1 |
| Assembly key | 1 |
| Silica gel | 2 |
| Operating and assembling manual – Housing with TV-camera | 1 |
| Warranty coupon | 1 |
| Certificate | 1 |
| All used engineering solutions are patented | № 13437, № 20599 |